B034 Prisme Holographique
Self-leveling structure in a compressed-air jar. Press to dose, shape the apex, and cure to glass in sixty seconds.
- Self-leveling formula
- 28+ days of wear
- Press-to-dose jar
- HEMA and TPO free
- Overlay, extensions, refills
- Made in France
Key features
- Self-leveling formula for a flawless, even surface
- Compressed-air jar: press to dose, or unscrew for the brush
- Suitable for overlay, strengthening, extensions with forms or tips, and refills
- Full control for precise structure and apex
- Cures in 60 seconds under LED, 120 under UV
- 28+ days of wear
- HEMA and TPO free
- Made in France
How to use
Nail preparation
- Disinfect the hands of the client and the professional.
- Gently push back the cuticles.
- Lightly mattify the surface of the natural nail using a 180 or 240 grit file.
- Carefully remove all dust.
- Apply a degreasing solution to clean and dehydrate the nail.
- Apply a bonding agent if necessary, avoiding contact with the skin.
Using the compressed-air jar
- By pressing: press the cap to dispense the desired amount of gel. Precise, fast, waste-free dosing.
- By unscrewing: unscrew the jar for traditional brush use, according to professional habits.
The system limits air contact, reduces product loss, and allows the product to be used until the very end.
Application
- Apply a thin layer of base gel, then cure under a lamp. LED 60 seconds, UV 120 seconds.
- Take the required amount of builder gel.
- Place the gel in the center of the nail.
- Work the product gently with a brush.
- Allow the gel to self-level naturally.
- Build the desired architecture and apex.
- Cure under a lamp. LED 60 seconds, UV 120 seconds.
- Repeat the application if necessary to increase strength.
Finishing
- Degrease the inhibition layer if necessary.
- File to perfect the shape.
- Carefully remove dust.
- Apply color, nail art, or finishing gel.
- Cure according to the product’s recommendations.
Removal
- Removal is done mechanically, using a file or electric filing device.
- Never forcibly remove the product to preserve the natural nail.
Storage
- Store away from direct light. Close tightly after use.
- Keep at room temperature, ideally between 15 and 25 degrees Celsius.
Ingredients and safety
Our products do not contain HEMA or TPO.
- Professional use only.
- May cause an allergic reaction.
- Avoid all contact with the skin and eyes.
- In case of eye contact, rinse immediately with clean water.
- Do not use on damaged or infected nails.
- Keep out of reach of children.
- Use in a well-ventilated area.
INCI:
Built by hand. Leveled by itself.
A professional self-leveling builder gel in a compressed-air jar. Place it, shape the apex, and the surface settles to glass on its own.
This is the surface as the brush leaves it.
And this is a minute later. Untouched.
100%
say the self-leveling formula makes application easier.
94%
say the air pressure jar prevents waste and overdosing.
83%
saw reinforced natural nails lasting 28+ days.
Anatomy of the compressed-air jar.
Sealed against air and light, dosed by the press, usable to the very end. Nothing left open, nothing wasted, nothing touched.
- Press capOne press doses exactly what the nail needs.
- Compressed-air chamberGentle pressure keeps the gel out of open air.
- Twist-open collarUnscrews for traditional brush work.
- Sealed shellBlocks air and light between services.
- The last gramServes the gel to the very end. Nothing lost.
As fresh on the last service as the first.
60Seconds
under the LED lamp. UV takes 120.
Now it is architecture.
You sculpt the apex. It polishes the surface.
Place the bead at the centre, guide it with the brush, build the architecture. The gel settles its own brush marks, so the shape you meant is the shape that cures.
Still level. Still glass.
Overlay, strengthening, extensions on forms or tips, refills. One gel for the whole appointment book, holding its shine past day 28.
Looks like skincare. Builds like structure.
A clear shell around a white core, a cap that doses with one press, and thirty millilitres of self-leveling structure inside.
Every detail, in the open.
- Formula
- Self-leveling builder gel
- Use
- Overlay, strengthening, extensions with forms or tips, refills
- Cure time
- LED 60 seconds, UV 120 seconds
- Jar
- Compressed air, press or unscrew
- Volume
- 30 mL, 1 fl. oz.
- Free of
- HEMA and TPO
- Removal
- Mechanical only, file or e-file
- Storage
- 15 to 25 °C, away from direct light
- Origin
- Made in France
Put it on your trolley.
The gel that levels itself, in a jar that keeps it perfect until the last press.
Add to cart