A smoky mauve builder gel.
Estimated delivery between Friday 13 November and Tuesday 17 November In stock
Information
- Do not interrupt curing before a minimum of 30 seconds, otherwise the gel polish may not cure thoroughly.
- For optimal product compatibility, use a base coat, gel polish, and top coat from the same brand.
- Nail polish shades may vary depending on your screen settings and photo lighting. We do our best to show colors as accurately as possible.
Key features
- Self-leveling formula for a flawless, even surface
- Compressed-air jar: press to dose, or unscrew for the brush
- Suitable for overlay, strengthening, extensions with forms or tips, and refills
- Full control for precise structure and apex
- Cures in 60 seconds under LED, 120 under UV
- 28+ days of wear
- HEMA and TPO free
- Made in France
How to use
Nail preparation
- Disinfect the hands of the client and the professional.
- Gently push back the cuticles.
- Lightly mattify the surface of the natural nail using a 180 or 240 grit file.
- Carefully remove all dust.
- Apply a degreasing solution to clean and dehydrate the nail.
- Apply a bonding agent if necessary, avoiding contact with the skin.
Using the compressed-air jar
- By pressing: press the cap to dispense the desired amount of gel. Precise, fast, waste-free dosing.
- By unscrewing: unscrew the jar for traditional brush use, according to professional habits.
The system limits air contact, reduces product loss, and allows the product to be used until the very end.
Application
- Apply a thin layer of base gel, then cure under a lamp. LED 60 seconds, UV 120 seconds.
- Take the required amount of builder gel.
- Place the gel in the center of the nail.
- Work the product gently with a brush.
- Allow the gel to self-level naturally.
- Build the desired architecture and apex.
- Cure under a lamp. LED 60 seconds, UV 120 seconds.
- Repeat the application if necessary to increase strength.
Finishing
- Degrease the inhibition layer if necessary.
- File to perfect the shape.
- Carefully remove dust.
- Apply color, nail art, or finishing gel.
- Cure according to the product’s recommendations.
Removal
- Removal is done mechanically, using a file or electric filing device.
- Never forcibly remove the product to preserve the natural nail.
Storage
- Store away from direct light. Close tightly after use.
- Keep at room temperature, ideally between 15 and 25 degrees Celsius.
Ingredients
Our products do not contain HEMA or TPO.
INCI:
Safety and manufacturer
Manufacturer
ELEGELLI SAS, 66 avenue des Champs-Élysées, 75008 Paris, France
contact@elegelli.com · +33 7 45 23 02 24
Precautions for use
For professional use only. For use on nails only. May cause an allergic reaction. Avoid all contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of clean water and consult a doctor if irritation persists. Do not apply to damaged or infected nails or skin. Use in a well-ventilated area. Do not swallow. Keep out of reach of children. Not recommended for children under 16 without adult supervision, or during pregnancy and breastfeeding. Keep the bottle tightly closed, away from light and heat.
Pairs well with
The builder that doesn’t lift, run or burn.
A self-leveling builder gel that holds its apex without running into the cuticles, cures without a heat spike and stays on for 28 days and more without lifting. HEMA-free, TPO-free and made in France, in an airtight press-to-dose jar.
- 28+ days No lifting, no pocket in the centre.
- No flooding Self-levels, then stays off the cuticles.
- No heat spike 60 s under LED, no burning.
Elegelli builder gel vs other builder gels
How to use it
Push back the cuticles, mattify with a 180 or 240 grit file, remove the dust, then degrease.
- Base gel60 s One thin layer.
- Builder gel60 s Press to dose, place it in the centre, let it self-level and build the apex.
- Finish Remove the inhibition layer if needed, file the shape, then colour or top coat.
Questions
Why does builder gel lift?
Elegelli builder gel holds 28 days and more. When a set lifts, look at the prep first: cuticle left on the nail plate, shine not fully removed, or gel touching the skin. Under-curing is the other cause: cure each layer 60 s under LED or 120 s under UV.
Will it run into the cuticles?
No. It self-levels, then holds where you place it, so the apex stays where you built it. Keep the jar at room temperature, between 15 and 25 °C, and the texture stays the same.
Does it get hot under the lamp?
No. It cures without a heat spike, so hands stay in the lamp for the full cure. For a very thick build, cure in two layers rather than one.
Will it crack at the stress area?
No. It stays strong where the nail flexes, so you don’t need to pile product on the stress area to stop it snapping.
How do I remove it?
With a file or an e-file, not by soaking, so there is no 30-minute wait. Leave a thin layer for the refill, or file down to the natural nail without ever forcing it off.
Is it HEMA-free?
Yes. It contains no HEMA and no TPO (it cures with TMO), and the full ingredient list is on this page. HEMA-free does not mean allergy-free: keep the gel off the skin and cure every layer fully.